Prior clients and projects

I was engaged in the following projects during my employment in Medigus (January 2005-December 2008):

Development of the endoscopic camera with a FOV of 140 degrees.
Development of the endoscopic camera with a FOV of 100 degrees.
Design of a low-cost endoscopic camera with a FOV of 100 degrees.
Development of image quality tests for endoscopic cameras.
Design of the endoscopic camera with ZOOM.
Design and development of the illuminating system for a thin endoscope.
Development of the illuminating system for GERD endoscope.
Development of the illuminating system for a thin endoscope based on small LEDs.

1.8mm and 3mm endoscopic cameras produced by Medigus.

Gastroscopy with a 3mm endoscopic camera.

I was responsible for solving all optical problems in Medigus:

Development of endoscopic cameras and illuminating systems from start to production stage.
Design endoscopic cameras and illuminating systems using ZEMAX.
Usage and support sophisticated equipment for measuring parameters of single lenses and assembled objectives.
Writing camera assembling instructions.
Support the production, sale, and marketing of endoscopic cameras.
The company's technological representative in meetings with customers in Israel and abroad.
I developed optics for 3mm and 1.8mm cameras that were the smallest CCD cameras for endoscopy in that period. Now OdysightAI (Israel) is using the optics with CMOSs.

Prior projects and clients of Mark Electro-Optics (December 2008-present).

Design of a micro-objective for a flexible endoscope and support its assembly. The project was completed for the company located in the USA.
Design of the illuminating system based on LED and plastic lightguide. The project was completed for the company in the USA.
Consulting service in the field of cameras for security. The project was completed for the company in the UK.
Development measurements of MTF, Distortion, and EFL for 1.2mm endoscopic camera which was produced by Medigus.
Development measurement of the FOV and angle of view of 3mm endoscopic camera which was produced by Medigus.
Design of a double-field camera in SWIR. The project was completed for the company in the USA.
Feasibility study of design an illuminating system based on an asymmetrical reflector and LEDs. The project was completed for the company in Israel.
Feasibility study of usage specific lens configuration for the design of an apochromatic objective for a surgical microscope. The project was completed for the company in Asia.
Consulting service in the field of stereo-microscopy. The project was completed for the company in Europe.
Design of eyepiece for a surgical microscope. The project was completed for the company in Asia.
Feasibility study of the design imaging system. The project was completed for the company in the USA.
Comparison of the Depths of Field of two endoscopic cameras with different F/numbers. The project was completed for Medigus.
Feasibility study of developing the fundus camera. The project was completed for the company in Asia.
Design of imaging system of fundus camera with Diopter adjustment from -15D to +15D. The project was completed for the company in Asia.
Design of the camera for micro-scanning. The project was completed for the company in the USA.
Design of a collimating lens for the Fizeau interferometer. The project was completed for the company in Asia.
Support of development illumination of the fundus camera. The project was completed for the company in the USA.
Decreasing stray light in the fundus camera. The project was completed for the company in the USA.
Design of an illuminating system for the object located at a long distance. The project was completed for the company in Australia.
Design of a small camera. The project was completed for the company in the USA.
Feasibility study of design a illuminating system for a fundus camera. The project was completed for the company in the USA.
Simulation of electro-optical system including a laser, ray splitting and polarizing parts. The project was completed for the company in Europe.
Simulation of the porcine eye in ZEMAX. The project was completed for the company in Israel.
Design of an illuminating system based on a laser diode. The project was completed for the company in Israel.
Consulting service in the field of wide FOV cameras. The project was completed for the company in the USA.
Design of an illuminating system with focal adjustment. The system is based on a laser diode. The project was completed for the company in Israel.
Consulting service in the field of imaging of moving objects. The project was completed for the company in Israel.
Design of an artificial cornea made from plastic for a human eye. The project was completed for the company in Israel.
Design of a compact camera with a wide FOV. The project was completed for the company in Israel.
Design of an illuminating system based on white LED for a flexible endoscope. The project was completed for the company in Asia.
Design of a small camera with a narrow FOV. The project was completed for the company in Israel.
Consulting service in the field of optics for endoscopy. The project was completed for the company in Asia.
Design VR glasses for the correction of human vision. The project was completed for the company in Asia.
Design of high resolution camera for diagnostic of cornea. The project was completed for the company in the USA.
Design of a laser beam delivery system for the photocoagulation of the retina. The system allows ZOOM of the laser spot and its scanning in lateral direction. The project was completed for the company in the USA.
Consulting service in the field of compact fundus camera. The project was completed for the company in the USA.
Consulting service in the field of low-cost fundus camera. The project was completed for the company in Europe.
Consulting service in the field of cameras for otoscopes. The project was completed for the company in the USA.
Consulting service in the field of the usage endoscope in cataract surgery. The project was completed for the company in the USA.
Consulting service in the field of machine vision. The project was completed for the company in Europe.
Design of a compact telephoto camera. The project was completed for the company in Europe.
Feasibility study of a design telephoto lens with high ZOOM. The project was completed for the company in Europe.
Consulting service in the field of usage a telecentric camera for testing 3D objects. The project was completed for the company in Europe.
Design of VR glasses for gaming. The project was completed for the company in Asia.
Consulting service in the field of intraoral scanners. The project was completed for the company in Asia.
Design of an illuminating system based on an asymmetrical reflector and LEDs. The project was completed for the company in Asia.
Consulting service in the field of wide-field of view fundus camera. The project was completed for the company in Asia.
Consulting service in the field of eye tracking. The project was completed for the company in Israel.
Consulting service in the field of compact fundus camera. The project was completed for the company in Europe.
Consulting service in the field of development of the optical system for finding small medical device under the skin. The project was completed for the company in Israel.
Design of an illuminating and imaging system of a compact fundus camera. The project was completed for the company in Europe.
Consulting service in the field of gonioscopy. The project was completed for the company in Israel.
Design of an illuminating system for machine vision. The project was completed for the company in Asia.
Design of illuminating and imaging systems for a compact fundus camera. The project was completed for the company in the USA.
Consulting service in the field of development of fundus camera for newborn baby. The project was completed for the company in Asia.
Design laser-fiber coupling system. The project was completed for the company in Israel.
Support of tolerance analysis of illuminating system using ANSIS-ZEMAX-OpticStudio. The project was completed for the company in the UK.
Consulting service for the development of automatic system for the authentication of expensive watches. The project was completed for the company in Israel.
Simulation of the light scattering on a thin layer of blood. The project was completed for the company in Asia.
Tolerance analysis of an electro-optical system based on a laser beam. The capability of physical optics propagation in ZEMAX was used. Usage of ZEMAX Programming Language for calculation parameters inside merit function. The project was completed for the company in Israel.
Consulting service in the field of compact fundus cameras. The project was completed for the company in the USA.

I want to present a few of my former customers.